Quality sheds & aviaries
manufactured in South Australia

 

Workshop Shed 1: The Tool shed

 

Features

  • Gable roof panel form shed supplied in 6-10 pre-assembled panels manufactured in  SA 
  • 0.4mm thick Australian Bluescope colorbond steel
  • Install yourself 
  • 18.5 Degree roof 
  • 1.83m wall height 
  • Extra large flashings that are colour coded to match your sheeting
  • Additional large colour coded corner flashings
  • T Bar type door handle (keyed) 1000 combinations
  • Choose your door position and hinge side (doors in gable incur a small charge)
  • Supplied in 6 pre-assembled panels from our SA factory for easy assembly on site. Models 4.5m or longer have 10 panels and prefabricated steel truss. In addition gables with widths of 3.02 and 3.76 are required to be split for transport.
  • “J” Channels support the sheeting are manufactured from Australian Bluescope galvanised steel. 
  • Heavy galvanised gauge ridge beam.
  • Tech screws are class 4, 10 gauge tech, there is no better
  • Panels are assembled with steel rivets, up to 3 times stronger than aluminium rivets
  • Doors are manufactured with square tube which increase strength at the hinges and reduces flex.
  • Manufactured in Edwardstown

Other Available Options

  • Doors
    • Double doors
    • Sliding doors
    • Wide doors
    • Gable doors
  • Concrete
  • Lights and power
  • Additional wall height
    • Standard is 1.83m, increase to 1.96m or 2.09m
  • Internal frame
    • Posts and rails as per our heavy duty shed
    • Can be added to existing sheds
  • Skylights
  • Gutters 
  • Windows
    • Louvre and sliding
    • Colour or Zinc
  • Delivery and installation

Tool shed Pricing

Length (m) Width (m) Wall Height (m)    
2.27 2.27 2.09    
3.02 2.27 2.09      
3.76 2.27 2.09    
4.5 2.27 2.09      
5.25 2.27 2.09    
6.00 2.27 2.09    
3.02 3.02 2.09      
3.76 3.02 2.09    
4.5 3.02 2.09    
4.96 3.02 2.09      
5.25 3.02 2.09    
6.00 3.02 2.09      
(Gable height will depend on size chosen)

Required size not listed here? Call our helpful staff and discuss special sizing.

 

Workshop Shed 2: The Cave

Features

    • Gable roof panel form shed
    • Australian Bluescope steel
    • 18.5 Degree roof 
    • Internal frame
      • 50 x 50 galvanised posts with plates an dynabolts
      • Posts can be anchored to the concrete slab or extended into slab.
      • Galvanised 38 x 25 rails insert into spigots high and low on each post. This provides a good anchor point for storage systems and/or lining.
    • Colour matched gutters with 75mm round pops
    • T Bar type door handle (keyed) 1000 combination
    • Additional horizontal bracing for the door
    • 2.09m wall height 
    • Extra large flashings that are colour coded to match your sheeting
    • Additional large colour coded corner flashings
    • Colour coded gutters
    • Easy to install yourself 
    • Sizes vary from 3.76m to 6m
    • Wall sheeting is 0.4mm thick
    • Internal truss 
    • Choose your door position and hinge side (doors in gable incur a small charge)
    • Supplied in 6 pre-assembled panels from our SA factory for easy assembly on site. Models 4.5m or longer have 10 panels and prefabricated steel truss. In addition gables with widths of 3.02 and 3.76 are required to be split for transport.
    • “J” Channels manufactured from galvanised steel. 
    • Popular style with a large range of sizes in zinc and colour sheeting
    • Heavy gauge galvanised ridge beam.
    • Tech screws are class 4, 10 gauge tech, there is no better
    • Panels are assembled with steel rivets, up to 3 times stronger than aluminium rivets
    • Doors are manufactured with square tube which increase strength at the hinges and reduces flex.
    • Manufactured in Edwardstown

Other Available Options

  • Doors
    • Double doors
    • Sliding doors
    • Wide doors
    • Gable doors
  • Concrete
  • Lights and power
  • Internal frame
    • Additional centre rail (38 x 25) can be added upon request, pricing is based on shed size and the number of doors.
  • Skylights
  • Windows
    • Louvre and sliding
    • Colour or Zinc
  • Delivery and installation

The Cave Pricing

Length (m) Width (m) Wall Height (m)    
2.27 2.27 2.09    
3.02 2.27 2.09      
3.76 2.27 2.09    
4.5 2.27 2.09      
5.25 2.27 2.09    
6.00 2.27 2.09    
3.02 3.02 2.09      
3.76 3.02 2.09    
4.5 3.02 2.09    
4.96 3.02 2.09      
5.25 3.02 2.09    
6.00 3.02 2.09      
(Gable height will depend on size chosen)

Required size not listed here? Call our helpful staff and discuss special sizing.


Reasons to choose Gardenmaster

hammer

Stronger materials
for longer life

delivery

Delivery and/or
installation arranged

SA-made

SA made & owned

guarantee

12 year structural
guarantee